If Virbela Go feels slow, laggy, choppy, or keeps disconnecting, you can usually fix it in a few minutes. Performance issues are usually caused by something on your end, such as your internet connection, your browser, or your network setup. This article walks you through the most common causes and how to resolve them.
Common symptoms this article can help with:
- Avatars or movement that look choppy or delayed
- Audio that cuts out, echoes, or sounds robotic
- Video or screen share that freezes or stays blurry
- Long loading times when entering a space
- Getting disconnected or kicked out of a session
Quick Checklist
Try these first. They resolve the majority of performance issues.
- Run a speed test and check your connection (Step 1).
- Close extra browser tabs and other apps (Step 2).
- Make sure you are using an up-to-date browser (Step 2).
- Turn off your VPN, or try a different network (Step 3).
- Refresh the page or sign back in to Virbela Go.
Step 1: Check Your Internet Connection
A weak or unstable connection is the number one cause of lag in Virbela Go. Real time audio, video, and avatar movement all depend on a steady connection.
Run a speed test
- Open a speed test site such as speedtest.net or fast.com.
- Run the test while you are in the same spot where you use Virbela Go.
- Note your download speed, upload speed, and ping (latency).
What to look for:
- Download and upload speed: As a general guide, a download speed of at least 10 Mbps and an upload speed of at least 5 Mbps will give you a smoother experience. Higher is better, especially if you will be on camera or sharing your screen.
- Ping (latency): Lower is better. A ping that is consistently high, or that jumps up and down, can cause delays and choppy audio.
If your results are low or unstable
- Move closer to your router, or connect your computer directly to the router with an Ethernet cable. A wired connection is almost always more stable than Wi-Fi.
- Pause other heavy activity on your network, such as video streaming, large downloads, cloud backups, or online gaming.
- Restart your router and modem. Unplug them for 30 seconds, plug them back in, and wait a few minutes for them to reconnect.
- Switch Wi-Fi bands. If your router offers both 2.4 GHz and 5 GHz, 5 GHz is typically faster at shorter range.
- Try another network, such as a different Wi-Fi network or a mobile hotspot, to see if the problem follows you.
- Contact your internet provider if your speeds are consistently far below what you are paying for.
Tip: Run the speed test a few times at different times of day. Speeds can vary a lot during peak hours.
Step 2: Check Your Browser
Virbela Go runs in your web browser, so your browser's health has a big effect on performance.
Use a supported, up-to-date browser
- Use a current version of a modern browser such as Google Chrome or Microsoft Edge. Note that Virbela Go does not support Safari.
- Check for updates in your browser settings and restart the browser after updating.
- If you are having trouble in one browser, try another to see if the issue goes away.
Close extra tabs and apps
Every open tab uses memory and processing power. If you have many tabs open, your browser may not have enough resources left to run Virbela Go smoothly.
- Close any tabs you are not using, especially tabs with video, streaming, or other heavy content.
- Close other apps running in the background, such as video editing tools, large downloads, or other video meeting apps.
- Restart your browser after closing everything to free up memory.
Clear your cache and cookies
A cluttered cache can sometimes cause loading problems.
- Open your browser settings and find the option to clear browsing data.
- Select cached images and files and cookies.
- Clear the data, close the browser, and reopen it.
You will be signed out of websites when you clear cookies, so have your login details ready.
Review your browser extensions
Some extensions, such as ad blockers, privacy tools, or security add-ons, can interfere with real time apps. Try one of the following:
- Open a private or incognito window (extensions are usually turned off there) and launch Virbela Go.
- Temporarily turn off your extensions and see if performance improves.
Check your browser permissions
Make sure your browser is allowed to use your microphone and camera for Virbela Go. If audio or video is not working, check the permissions icon in your browser's address bar and make sure access is set to Allow.
Turn on hardware acceleration
Hardware acceleration lets your browser use your computer's graphics processor, which helps with 3D environments. It is on by default in most browsers, but you can confirm it in your browser's System or Performance settings.
Step 3: Check Your VPN and Network Setup
Are you on a VPN?
A VPN routes your traffic through another server, which can add delay and reduce speed. Corporate VPNs can also block or slow the type of traffic Virbela Go relies on.
- Disconnect from your VPN and see if performance improves.
- If you must stay on your VPN, ask your IT team whether they can set up an exception (sometimes called split tunneling) for Virbela Go.
- If you use a personal VPN, try switching to a server closer to your location.
Firewalls and network restrictions
Workplaces, schools, and some public networks use firewalls that can limit real-time audio and video. If Virbela Go works fine at home but not on your work or school network, ask your IT team to review your network settings. We are happy to share the technical details they need. Just contact our Support team.
Step 4: Check Your Device
- Restart your computer. This clears out memory and background processes and fixes a surprising number of issues.
- Keep your system updated. Install the latest operating system and graphics driver updates.
- Check power settings. On a laptop, plug in your charger and make sure your device is not in a battery saver or low power mode, which can reduce performance.
- Check your headset and camera. Unplug and reconnect your audio devices, and make sure the correct microphone and speakers are selected in Virbela Go, that the browser has permissions, and your system settings are correct.
- Close other video and audio apps that may be using your camera or microphone at the same time.
Still Having Trouble?
If you have worked through the steps above and Virbela Go is still not performing the way it should, our Support team is here to help. To get you answers faster, please include the following when you contact us:
- A description of what is happening and when it started
- The browser and version you are using
- Your operating system (for example, Windows 11 or macOS)
- Your speed test results (a screenshot works well)
- Whether you are on a VPN, and whether you are on a home, work, or school network
- The name of the space or event you were in and the approximate time of the issue
- Any screenshots or screen recordings that show the problem
Frequently Asked Questions
Why is Virbela Go slow for me but fine for other people in the same session?
Performance depends on each person's own connection, device, and browser, so one person's experience can differ from another's. Working through the steps above on your end usually resolves it.
Does having many people in a space affect performance?
It can. Larger sessions require more from your device and connection. Closing other tabs and apps and using a wired connection can help a lot in busy sessions.
Will switching browsers help?
Often, yes. If the problem only happens in one browser, switching to another up-to-date browser is a quick way to confirm whether the browser is the cause.
Should I use Wi-Fi or Ethernet?
Ethernet is recommended when possible because it is more stable. If you are on Wi-Fi, sit close to your router and use the 5 GHz band if available.